Asphalt Calculator
What are you paving?
Pick the job — we suggest a depth. You can change it next.
Pick a project to continue.
How big is the area?
Length × width, plus the compacted thickness.
Depth means compacted thickness — what is left after rolling, not the loose depth.
Waste allowance — extra for spills, uneven grade & over-dig
Your asphalt order
Tons of hot mix — exact
– tons
- Order this much
- –
- Cubic yards
- –
- Area
- –
- Volume
- –
💡 Pro field tips
🧰 Tools you'll need
Tap to check off as you load up.
Est. project cost (optional)
File this estimate under a job name or PO to track what to order. Leave blank to file under "General".
Copied to clipboard ✓
How the math works
Asphalt flips the usual problem: you measure your job in feet and inches, but the plant sells hot mix by the ton. The whole calculation is a bridge between the two — area to volume, then volume to weight using the density of compacted mix.
Area and volume: length × width × depth
Multiply length by width for square feet, then multiply by the depth in feet (inches ÷ 12) for cubic feet. Divide by 27 if you want cubic yards — one cubic yard is 27 cubic feet:
Cubic yards = Length (ft) × Width (ft) × Depth (in ÷ 12) ÷ 27
Weight: 145 pounds per cubic foot
Compacted hot mix weighs about 145 lb per cubic foot — roughly 2 tons per cubic yard. The weight formula:
Tons = Cubic feet × 145 ÷ 2,000
Why the order rounds up
Plants load in practical amounts, and running short with a cooling truck is the expensive mistake — so the order suggestion rounds the exact tons up to the nearest quarter ton. The calculator shows you both numbers: exact for your records, rounded for the phone call.
Worked example: 20 × 10 driveway, 3" compacted
- Area: 20 × 10 = 200 ft²
- Volume: 200 × (3 ÷ 12) = 50 ft³ = 1.85 yd³
- Weight: 50 × 145 ÷ 2,000 = 3.6 tons
- Order: round up to the nearest quarter ton → 3.75 tons
Need the stone base under it first? Run the Gravel Calculator for that layer, then add the two orders together.
Worked example
A 30 × 20 ft parking pad, paved 2.5 inches thick (compacted). The plant sells by the ton, so here's the bridge from measurements to the phone call:
- Area: 30 × 20 = 600 ft²
- Volume: 600 × (2.5 ÷ 12) = 125 ft³ = 4.63 yd³
- Weight: 125 × 145 lb/ft³ ÷ 2,000 = 9.06 tons exact
- Order quantity, rounded up to the nearest quarter ton like the calculator suggests: 9.25 tons
That quarter-ton of cushion is the difference between finishing the pad and watching the last strip cool in the truck.
On a real job
- Asphalt fails from the bottom, not the top. Most paving problems are base problems wearing an asphalt coat. Proof-roll the base, dig out and replace soft spots, and compact it before the truck is even called.
- Order compacted thickness, set the screed loose. Hot mix compacts under the roller — a 2.5-inch mat starts around 3 to 3¼ inches loose. Set your screed or grade stakes for the loose depth or you'll pave thin.
- Heat is a budget that spends itself. Mix loses temperature in the truck, in the wind, and on a cold base. Long hauls and cold mornings shrink your working window — small jobs on cold days want the shortest haul and the warmest part of the day.
- Never pave over a wet base. Trapped water turns to steam and weak spots under load. If the base is pumping or ponding, wait or fix it.
- Tack the edges where new meets old. A tack coat on the joint face bonds the seam. Skip it and the seam opens into a crack that lets water straight into your base.
Most Asked Questions
How many tons of asphalt do I need for a 20×10 driveway at 3 inches?
Order 3.75 tons. The driveway is 200 sq ft and 50 cubic feet; at 145 lb per cubic foot that's 3.6 tons exact, and the order rounds up to the nearest quarter ton.
How much area does 1 ton of asphalt cover at 3 inches?
About 55 square feet. One ton is 2,000 lb, which at 145 lb per cubic foot is about 13.8 cubic feet — spread 3 inches (0.25 ft) thick, that covers roughly 55 sq ft.
How thick should a driveway be?
2–3 inches of compacted hot mix for cars on a solid base. Parking areas, heavier vehicles, or a weaker base usually need 3–4 inches or more. Extra thickness cannot make up for a soft base — fix the base first.
Is asphalt the same as blacktop?
For measuring and ordering, yes. Blacktop is the common name for the same hot-mix asphalt, and plants sell both by the ton. Some regions use the words a little differently, but the math is the same.
Does this calculator include the gravel base?
No — it figures the asphalt layer only. Base stone, grading, and removing old pavement are not included. If you need base too, figure that layer separately and add the two orders together.
Does the calculator add waste for me?
No — it starts at 0% waste, and you add what you want. Tap a waste chip (5–20%) above the results to build in a cushion: on the 20×10 driveway above, 10% takes the order from 3.75 to 4 tons. The order rounds up to the nearest quarter ton either way.