Kipi Calculator BRICK ESTIMATOR by Kipi Calculator
🌐 Español

Brick Calculator

    What brick are you laying?

    Pick your brick size — coverage is figured from the face size plus a 3/8″ mortar joint.

    How big is the wall?

    Length × height, minus any windows and doors.

    Add up the windows and doors in this wall, in square feet. A standard door is about 21 sq ft, a 3 × 5 window about 15. Leave at 0 if there are none.

    Your brick order

    Waste allowance Starts at 0% — tap to add a cushion for cuts & breakage.

    Order this many

    – bricks

    Exact bricks
    –
    Mortar bags (80 lb)
    –
    Net wall area
    –
    Coverage
    –

      💡 Pro field tips

        🧰 Tools you'll need

        Tap to check off as you load up.

        Est. project cost (optional)

        File this estimate under a job name or PO to track what to order. Leave blank to file under "General".

        Assumptions & limits: Brick sizes are nominal and vary by maker — measure your actual brick and pick the closest size. The math assumes 3/8-in mortar joints and a single-wythe veneer wall; a structural double-wythe wall needs roughly twice the bricks. Mortar bags are based on Quikrete's published yield — one 80-lb bag of mortar mix lays up to 37 standard bricks. Pavers laid flat use a different coverage (the face is the bed, not the side), so this calculator is for walls and veneer. Structural work needs wall ties and must meet local code — this tool gives counts only, not engineering.

        How the math works

        Bricks are counted by the face — the side you see when the wall is done. Each brick covers its face plus one mortar joint, so the whole count comes from three steps: how much wall you have, how much of it one brick covers, and a waste cushion so you don't run short on the last course.

        Coverage: one brick plus its joint

        Standard mortar joints are 3/8 inch. Add one joint to the brick's length and height, multiply to get the wall area each brick covers, then divide into a square foot (144 square inches):

        Bricks per sq ft = 144 ÷ ((brick length + ⅜″) × (brick height + ⅜″))

        A modular brick: (8 + 0.375) × (2.25 + 0.375) = 8.375 × 2.625 = 21.98 sq in per brick, and 144 ÷ 21.98 = 6.55 bricks per sq ft. Bigger faces cover more wall per brick — queen bricks work out to 5.50 per sq ft and kings to 4.80.

        Wall area: length × height, minus openings

        Multiply the wall's length by its height for the gross square feet, then subtract windows and doors — a standard door is about 21 sq ft and a 3 × 5 ft window about 15. What's left is the area that actually gets brick.

        The 10% cushion

        Bricks get cut at corners and ends, and a few always arrive chipped or break on the pile. Ordering 10% extra is the standard allowance — it costs less than a second delivery, and leftovers from the same lot are gold for future repairs.

        Mortar: bags from the brick count

        Mortar use tracks the brick count, not the wall area. Quikrete's published yield for its mortar mix is up to 37 standard bricks per 80-lb bag, so bags = bricks to order ÷ 37, rounded up. Thick joints and beginner trowel work use more, so don't stretch bags thin to save a few dollars.

        Worked example: 10 × 8 ft wall, modular brick

        • Wall area: 10 × 8 = 80 sq ft, no openings
        • Exact bricks: 80 × 6.55 = 524 bricks
        • With the 10% cushion: → order 577 bricks
        • Mortar: 577 ÷ 37 = 15.6 → 16 bags (80 lb)

        One trip to the yard, no mid-wall scramble.

        Most Asked Questions

        How many bricks do I need for 100 square feet?

        655 modular bricks, exact — this calculator starts at 0% waste. Modular runs 6.55 bricks per sq ft — each brick plus a standard 3/8″ joint. Tap the 10% waste chip and you order 721. Queen bricks cover more per brick: 550 exact, 605 at 10%. Kings cover the most: 480 exact, 528 at 10%.

        How many bags of mortar do I need?

        About 3 bags per 100 bricks. The tool divides your order count by 37 — one 80-lb bag of mortar mix lays up to 37 bricks, Quikrete's published yield — and rounds up. The 100 sq ft modular wall above takes 18 bags at the exact count.

        What's the difference between modular, queen, and king bricks?

        It's the face size. Modular is 8″ long × 2¼″ high — the standard US brick. Queen is 8″ × 2¾″ — the same length with a taller face, so you need fewer bricks and less mortar per wall. King is 9⅝″ × 2⅝″ — the longest of the three, so it covers a wall fastest.

        How many bricks come in a cube (pallet)?

        Around 500 for modular — commonly 500 to 534. It depends on the brick size and the maker, and bigger queen and king bricks come in smaller cubes. Always confirm the cube count with your supplier before you plan delivery.

        Do I subtract windows and doors?

        Yes — that's what the Openings field is for. Measure each window and door in square feet, add them up, and enter the total; the calculator subtracts before counting. A 21 sq ft door in a 100 sq ft modular wall drops the count from 655 to 518.

        Does the waste percentage change the mortar too?

        Yes — bags follow the order count. Mortar is figured from the bricks you're ordering, waste included: the 100 sq ft wall takes 18 bags at 0% and 20 bags with the 10% chip tapped.

        Next calculation

        One job usually leads to the next number. Common next steps from here:

        Embed this calculator on your site

        Run a DIY, contractor, or supplier site? Put this brick calculator right on your page, free. Copy the code and paste it where you want it — your visitors get the numbers without leaving your site.

        Free to use. The small “Powered by Kipi Calculator” line at the bottom of the calculator stays on — that’s all we ask.

        Popular lookups

        20×4 wall · 20×8 wall · 30×8 wall · 10×8 wall · All charts