Cabinet Estimator
Measure your cabinet runs
Measure each wall of cabinets wall-to-wall. Don't subtract for the sink or stove — fillers cover those gaps.
Your cabinet list
Buy this many boxes
–
- Base boxes
- –
- Wall boxes
- –
- Filler strips
- –
- Toe-kick
- –
- Countertop
- –
- Knobs / pulls
- –
💡 Pro field tips
🧰 Tools you'll need
Tap to check off as you load up.
Est. project cost (optional)
File this estimate under a job name or PO to track what to order. Leave blank to file under "General".
Copied to clipboard ✓
How the math works
Cabinet math looks simple until you are standing in a kitchen with a tape measure, wondering why your numbers never match the quote. The trick is that cabinets are not priced by the room — they are priced by the linear foot of wall they cover, split into base cabinets (below the counter) and wall cabinets (above it). This calculator turns your wall measurements into box counts, countertop area, and hardware so you can budget and order without surprises.
Step 1: Measure linear feet of cabinet run
Measure each wall where cabinets will go, in feet. That total is your linear feet. A 12-foot wall of base cabinets is 12 linear feet — the fundamental unit of cabinet pricing. Corners need care: measure to the corner once, not twice, or you will double-count the corner cabinet. The calculator treats each straight run separately for this reason.
Step 2: Convert linear feet to box counts
Cabinet boxes come in standard widths — commonly 12, 15, 18, 24, 30, and 36 inches. The calculator divides your linear footage into standard box widths to estimate how many boxes you need: boxes ≈ linear feet × 12 ÷ average box width. A 12-foot run at the calculator’s average 36-inch (3-ft) box width needs about 4 boxes. Real layouts mix widths to fit exactly, but this estimate gets you within one box — close enough to budget and to sanity-check a contractor's quote.
Step 3: Separate base from wall cabinets
Base and wall cabinets are counted separately because they cost different amounts and come in different depths (base boxes are 24 inches deep, wall boxes are 12). The calculator applies your box-count math to each run type on its own. An L-shaped kitchen with 14 feet of base and 10 feet of wall gets two separate counts — never lump them together, or your budget will be off by thousands.
Step 4: Countertop square footage
Countertop area is linear feet of base cabinets × countertop depth (25 inches ÷ 12 ≈ 2.083 ft). That extra inch beyond the 24-inch box is the overhang at the front edge. A 12-foot run needs about 25 square feet of countertop material. Stone is priced by the square foot (or by the slab), so this number drives a huge chunk of the remodel cost.
Step 5: Hardware and a cushion
Every door and drawer needs a knob or pull — the calculator estimates two pieces of hardware per box (one per door or drawer front). The counts are exact — add your own 10% cushion on materials when you order, because cuts, mistakes, and that one box that arrives damaged are a fact of every job.
Worked example
A galley kitchen with 10 feet of base cabinets on each wall: 20 linear feet of base. At the calculator’s average 36-inch (3-ft) box width, that is 20 ÷ 3 = 7 base boxes. Countertop: 20 × 25 ÷ 12 = 41.67 sq ft. Hardware: 2 per box = 14 knobs/pulls. Add 10% buffer to the material quantities and you have a realistic order list.
Most Asked Questions
How many cabinet boxes do I need for a 12-foot run?
About 4 base boxes. The calculator divides your linear footage by its average 36-inch (3-ft) box width and rounds up: 12 ÷ 3 = 4. Real layouts mix standard widths — 12, 15, 18, 24, 30, and 36 inches — to fit exactly, but this estimate gets you within one box for budgeting.
What does the worked example — 20 linear feet of base cabinets — come to?
7 base boxes, about 41.67 sq ft of countertop, and 14 knobs or pulls. That is a galley kitchen with 10 feet of base cabinets on each wall: 20 ÷ 3 rounds up to 7 boxes, the countertop is 20 × 25 ÷ 12 = 41.67 sq ft, and the hardware count is 2 pieces per box.
How is the countertop square footage figured?
Linear feet of base cabinets × the 25-inch counter depth, divided by 12. The extra inch beyond the 24-inch-deep box is the overhang at the front edge. A 12-foot run needs 12 × 25 ÷ 12 = 25 sq ft of countertop material — the number stone is priced from, by the square foot or by the slab.
Are base cabinets and wall cabinets counted the same way?
No — the calculator counts them separately. Base boxes are 24 inches deep and wall boxes are 12 inches deep, and they cost different amounts, so each run type gets its own box count. An L-shaped kitchen with 14 feet of base and 10 feet of wall gets two separate counts — never lump them together, or the budget will be off.
What else does the count include besides boxes?
2 filler pieces, and toe-kick equal to your base run. Every result adds a standard pair of fillers — the scribed strips that close the gaps where a run meets the wall — and toe-kick footage matching the linear feet of base cabinets, so neither gets forgotten on the order.
Are the box counts exact?
They are exact counts at the calculator's average box width — then add your own cushion when you order. The counts themselves carry no hidden extra. The page's advice is to add your own 10% cushion on materials when you order, because cuts, mistakes, and the one box that arrives damaged are a fact of every job.