Kipi Calculator CONCRETE BLOCK CHART by Kipi Calculator
🌐 Español

Concrete Blocks for a 20×4 Wall

A 20×4 ft wall is 80 ft² with no openings. Counts use the same math as the concrete block calculator: every standard block (8×8×16 face, any thickness) covers 0.889 ft² with its mortar joint — 1.125 blocks per square foot — and pre-mixed mortar in 80-lb bags is figured at about 30 blocks per bag. If your wall has doors or windows, subtract their area in the calculator and the count drops.

20×4 wall: 90 blocks · 3 bags of mortar (80-lb) · 6 courses — exact count, no waste added

Concrete blocks for a 20×4 wall

ItemCount
Blocks (exact, 0% waste)90
Blocks with 10% waste — optional99
Mortar, 80-lb bags (at the exact count)3
Mortar, 80-lb bags (at the 10% count)4
Courses (rows) high6
Net wall area80 ft²

How it is figured: blocks = 80 ft² × 1.125 per ft² = 90, rounded up to 90 blocks. Mortar = 90 ÷ 30 blocks per 80-lb bag, rounded up = 3 bags. Courses = 4 ft ÷ 8 in. per course = 6 courses. Block thickness (4, 6, 8, or 12 in.) does not change the count — every size shares the same 8×16 face.

The headline counts are exact — no waste is baked in. The calculator itself starts at 0% waste, and its waste chips raise the block count (and the mortar that follows it) only when you tap one. The 10% rows above are the same figures the calculator gives with its 10% chip tapped — a sensible cushion for cuts and breakage on a straight wall.

Common questions

How many concrete blocks do I need for a 20×4 wall?

90 blocks exactly — 80 ft² × 1.125 blocks per square foot = 90, rounded up. With the 10% waste chip tapped for cuts and breakage, order 99. The wall stands 6 courses high.

How much mortar do I need for a 20×4 wall?

3 bags of 80-lb pre-mixed mortar at the exact block count — about one bag per 30 blocks, rounded up (90 ÷ 30). At the 10% block count (99 blocks) it is 4 bags. Bedding every shell solid uses more — manufacturers rate a bag as low as 13 blocks at full bedding.

Does block thickness change the count?

No — 4, 6, 8, and 12-in. block all count the same. Every size has the same 8×16 face, so each block covers 0.889 ft² with its mortar joint. Thickness changes the wall's strength, not the count.