Kipi Calculator CONCRETE BLOCK CHART by Kipi Calculator
🌐 Español

Concrete Blocks for a 25×8 Wall

A 25×8 ft wall is 200 ft² with no openings. Counts use the same math as the concrete block calculator: every standard block (8×8×16 face, any thickness) covers 0.889 ft² with its mortar joint — 1.125 blocks per square foot — and pre-mixed mortar in 80-lb bags is figured at about 30 blocks per bag. If your wall has doors or windows, subtract their area in the calculator and the count drops.

25×8 wall: 225 blocks · 8 bags of mortar (80-lb) · 12 courses — exact count, no waste added

Concrete blocks for a 25×8 wall

ItemCount
Blocks (exact, 0% waste)225
Blocks with 10% waste — optional248
Mortar, 80-lb bags (at the exact count)8
Mortar, 80-lb bags (at the 10% count)9
Courses (rows) high12
Net wall area200 ft²

How it is figured: blocks = 200 ft² × 1.125 per ft² = 225, rounded up to 225 blocks. Mortar = 225 ÷ 30 blocks per 80-lb bag, rounded up = 8 bags. Courses = 8 ft ÷ 8 in. per course = 12 courses. Block thickness (4, 6, 8, or 12 in.) does not change the count — every size shares the same 8×16 face.

The headline counts are exact — no waste is baked in. The calculator itself starts at 0% waste, and its waste chips raise the block count (and the mortar that follows it) only when you tap one. The 10% rows above are the same figures the calculator gives with its 10% chip tapped — a sensible cushion for cuts and breakage on a straight wall.

Common questions

How many concrete blocks do I need for a 25×8 wall?

225 blocks exactly — 200 ft² × 1.125 blocks per square foot = 225, rounded up. With the 10% waste chip tapped for cuts and breakage, order 248. The wall stands 12 courses high.

How much mortar do I need for a 25×8 wall?

8 bags of 80-lb pre-mixed mortar at the exact block count — about one bag per 30 blocks, rounded up (225 ÷ 30). At the 10% block count (248 blocks) it is 9 bags. Bedding every shell solid uses more — manufacturers rate a bag as low as 13 blocks at full bedding.

Does block thickness change the count?

No — 4, 6, 8, and 12-in. block all count the same. Every size has the same 8×16 face, so each block covers 0.889 ft² with its mortar joint. Thickness changes the wall's strength, not the count.