Concrete Calculator Comparison: One Slab, Three Answers
Type one small slab into three concrete calculators and you get two different shopping lists: 56 bags or 62 bags of 80-lb mix. Both numbers come from real math — they just start from different rulers. Here's the whole thing, step by step, so you can see exactly where they split and decide which list to carry into the store.
Tested November 10, 2026. Every result here comes from running one identical job — a 10 ft × 10 ft slab, 4 inches thick, figured in 80-lb bags — through each site's concrete calculator that day, then checking each site's construction catalog and Spanish options. Sites change their tools; if a live calculator ever disagrees with this page, believe the calculator and we'll fix the page.
Step 1 — the volume nobody argues about
The slab is 10 ft × 10 ft, 4 inches thick. Volume = 10 × 10 × (4 ÷ 12) = 33.33 ft³. In yards: 33.33 ÷ 27 = 1.2346 yd³. All three calculators agree here — Kipi and Inch display 1.23 yd³, Omni displays 1.2346 yd³. Same slab, same volume, different number of decimals.
Step 2 — bags by yield: where 56 comes from
An 80-lb bag of concrete mix has a standard printed yield: 0.6 ft³ per bag. That's 27 ÷ 0.6 = 45 bags to the cubic yard. Divide the slab by the yield: 33.33 ÷ 0.6 = 55.55 bags. You can't buy half a bag, so you round up: 56 bags. That's the answer the Kipi concrete calculator gives at its 0% waste default, and it's the answer Inch Calculator gives too.
Step 3 — bags by weight: where 62 comes from
Omni's answer for the same slab, with its waste field at 0%, was 62 bags. Its method runs through weight instead of yield: the slab holds roughly 5,000 lb of concrete, and 5,000 ÷ 80 lb per bag lands at 62 bags. To be fair to Omni, its 62 is not a hidden waste cushion — it's a different measuring stick.
The wrinkle is that Omni's own FAQ gives two different yields for the same 80-lb bag: 0.53 ft³ in one sentence, and figures that imply 0.60 ft³ in the next. Run the 0.53 figure yourself — 33.33 ÷ 0.53 = 62.9, so 63 bags — and it matches neither Omni's 62 nor the standard-yield 56. When the documentation lists two yields for one bag, there's no way to tell which one the calculator used. The standard yield, 0.6 ft³, is the one printed for 80-lb bags — and it's the math behind 56.
Step 4 — the order number, in yards
Bags are for small pours; past about a yard, ready-mix is usually the cheaper way to go. The exact need here is 1.2346 yd³, but plants sell in steps. Kipi shows both numbers: the exact 1.23 yd³ and the order figure, 1.5 yd³ — the exact amount rounded up to the nearest half yard, the way plants actually sell it. Inch and Omni show the exact volume and leave the rounding to you. Neither approach changes the slab; one of them saves you a step at the counter.
Waste, three ways
- Kipi: waste chips at 0/5/10/15/20%, starting at 0%. Tap +10% and Kipi's answer becomes 62 bags too — the same number as Omni's, except you chose it, and a highlighted notice in the result says so.
- Omni: a waste field, 0% by default. Its 62 comes from the weight method, not from waste.
- Inch: no waste field at all. Its article advises adding 5–10% yourself, after the result.
The verdict, by job
- Mixing bags for a small pad: buy 56 at the standard yield (Kipi or Inch), then add waste only if you decide to — on Kipi that's one tap, and it's printed on the result.
- Ordering ready-mix: order 1.5 yd³. Kipi shows that figure directly; anywhere else, round 1.23 up to the plant's step yourself.
- Crew works in Spanish: Kipi's concrete calculator in Spanish is the full tool, not a summary; Omni also has a Spanish section.
- The number has to end up in a bid: Kipi files it in the Job Log or builds it into a bid — the others give you the answer and leave the paperwork to you.
The wider three-site table — catalog sizes, Spanish, extras — is in the construction calculator comparison, and every concrete tool lives on the Concrete & Masonry Calculators hub.
Frequently asked questions
How many 80-lb bags of concrete do I need for a 10×10 slab, 4 inches thick?
56 bags at the standard yield. The slab is 33.33 ft³, an 80-lb bag yields 0.6 ft³, and 33.33 ÷ 0.6 = 55.55 — always round bags up, so 56. That's before any waste allowance you choose to add.
Why do some concrete calculators say 62 bags for the same slab?
They count from weight instead of yield: the slab holds about 5,000 lb of concrete, and 5,000 ÷ 80 lb per bag gives 62. Omni's calculator works this way, and its FAQ lists two different yields for an 80-lb bag — 0.53 ft³ in one sentence, 0.60 ft³ implied in the next — so its count can't be reproduced from a single stated yield.
How many 80-lb bags are in a cubic yard?
45. A cubic yard is 27 ft³ and an 80-lb bag yields 0.6 ft³, so 27 ÷ 0.6 = 45 bags per yard.
How much ready-mix should I order for a 10×10×4 slab?
The exact volume is 1.2346 yd³ (shown as 1.23). Ready-mix is sold in steps, so the practical order is 1.5 yd³ — the exact amount rounded up to the nearest half yard. Kipi shows that order figure alongside the exact one.
Should I add waste to the bag count?
That's your call, and it should be a visible one. On Kipi the waste chips start at 0%; tap +10% and the same slab figures 62 bags, with a notice in the result stating the cushion is included. Inch Calculator has no waste field — its article suggests adding 5–10% yourself.
Estimates for planning only — confirm final quantities with your supplier and follow local building code.