Kipi Calculator CONCRETE SLAB CHART by Kipi Calculator
🌐 Español

Concrete for a 10×20 Slab

A 10×20 foot slab covers 200 square feet. At the standard 4″ thick it takes 2.47 cubic yards — or 112 bags of 80 lb mix if you are bagging it. Order about 3 yards from a truck to cover waste and grade that is never perfect.

10×20 slab @ 4″: 2.47 yd³ (order 3) · 112 × 80 lb bags · 149 × 60 lb · 223 × 40 lb

Concrete for a 10×20 slab by thickness

ThicknessVolume80 lb bags60 lb bags40 lb bags
4″2.47 yd³112149223
5″3.09 yd³139186278
6″3.7 yd³167223334

How it is figured

Volume = length × width × thickness, all in feet: 10 × 20 × (4 ÷ 12) = 66.67 ft³, and 66.67 ÷ 27 = 2.47 yd³. Bag counts divide the cubic feet by each bag's yield (0.6 / 0.45 / 0.3 ft³). The order figure rounds the yards up to the nearest half yard after a 10% allowance — ready-mix is sold in part-yard steps and a short load fee costs more than the extra concrete.

Driveways and anything a vehicle parks on usually want 5″ or 6″ and rebar or mesh — the table has those volumes. Patios and shed floors are fine at 4″. The free concrete calculator handles footings, columns, and odd shapes too.

Keep figuring

Concrete calculator · All charts & tables · Bags per yard chart

Common questions

How much concrete do I need for a 10×20 slab?

At 4 in. thick: 2.47 cubic yards (112 bags of 80 lb, 149 of 60 lb, 223 of 40 lb). Order about 3 yards to cover waste. At 6 in. thick it is 3.7 yards.

How many bags for a 10×20 slab?

For a 4 in. slab: 112 bags of 80 lb mix, 149 of 60 lb, or 223 of 40 lb. That is a lot of mixing — past a yard, a ready-mix truck usually wins.

How thick should the slab be?

4 in. for patios, walkways, and shed floors. 5–6 in. for driveways and anything vehicles park on, with rebar or wire mesh. Local frost rules can require footings at the edges — check local code.