Kipi Calculator CUBIC YARD CALCULATOR by Kipi Calculator

Cubic Yard Calculator

    What are you measuring?

    Two ways in — pick the one that fits your job.

    How big is it?

    Fractions work — type 4 1/2 and we'll convert it.

    Depth is usually in inches — 12 in = 1 ft deep. Measure in a few spots and use the average.

    What's going in it? (optional — adds a weight estimate)

    Extra for ordering — this tool measures the exact volume, so it starts at 0%. Add a few % only if you're turning this number into an order.

    Your volume

    The volume is

    – yd³

    One cubic yard is a cube 3 ft × 3 ft × 3 ft — 27 cubic feet. Bulk material is sold by the cubic yard, so this is the number the yard will ask for.

    Cubic feet
    –
    Cubic meters
    –
    Area covered
    –

    🚚 Need to order it? Pick your material

    Each material has its own calculator with bags, tons, delivery loads and a waste allowance you set yourself.

      💡 Pro field tips

        🧰 Tools you'll need

        Tap to check off as you load up.

        File this volume under a job name or PO. Leave blank to file under "General".

        How the math works

        Almost every bulk material on a job — gravel, sand, mulch, topsoil, concrete — is sold by the cubic yard. But nobody measures a yard in cubic yards. You measure in feet and inches, and this calculator turns that into the number the material yard actually sells by.

        A cubic yard is 27 cubic feet

        A cubic yard is a cube 3 feet long, 3 feet wide, and 3 feet deep:

        1 yd³ = 3 × 3 × 3 = 27 ft³

        Every conversion on this page runs through that one fact.

        From length × width × depth

        Length and width are in feet; depth is usually in inches, so it converts to feet first:

        Cubic feet = Length (ft) × Width (ft) × (Depth (in) ÷ 12)

        Cubic yards = Cubic feet ÷ 27

        From cubic feet

        Already have a cubic-feet figure — off a quote, a drawing, or your own math? Skip straight to the same division:

        Cubic yards = Cubic feet ÷ 27

        Cubic meters

        One cubic yard is 0.764555 cubic meters:

        Cubic meters = Cubic yards × 0.764555

        Why the "extra" starts at 0% here

        This is a measuring tool, not an ordering tool — its job is to tell you the exact volume, so the extra-for-ordering setting starts at 0% and the headline number is the true volume. The material calculators on this site (gravel, concrete, mulch, and the rest) are ordering tools, and they build their allowance in. If you're turning this number into an order yourself, tap in 5–10% here to cover settling, spills, and the low spots no tape measure catches — or run the material's own calculator and let it handle the allowance.

        Weight estimates: gravel and dry sand only

        Volume alone doesn't tell you what a load weighs, and weight depends on the material — so this calculator only estimates weight for the two materials whose densities the site's own tools already use, with the same factors:

        • Gravel: about 1.4 tons per cubic yard — the same factor the Gravel Calculator uses.
        • Dry sand: about 1.35 tons per cubic yard — 100 lb per cubic foot, the Sand Calculator's dry-sand density (27 ft³ × 100 lb = 2,700 lb ≈ 1.35 tons).

        Wet material weighs more, and compaction changes the number — treat the weight as a planning estimate for sizing a truck or trailer, not a scale ticket.

        Worked example: a 10 × 10 ft bed, 12 inches deep

        • Area: 10 × 10 = 100 ft²
        • Volume: 100 × (12 ÷ 12) = 100 ft³
        • Cubic yards: 100 ÷ 27 = 3.70 yd³
        • Cubic meters: 3.70 × 0.764555 = 2.83 m³
        • As gravel: 3.70 × 1.4 = about 5.19 tons
        • With 10% extra for ordering: 3.70 × 1.10 = 4.07 yd³

        Worked example

        You're filling a 10 × 20 ft parking pad with 6 inches of gravel. Using this calculator's own math:

        • Area: 10 × 20 = 200 ft²
        • Volume: 200 × (6 ÷ 12) = 100 ft³
        • Cubic yards: 100 ÷ 27 = 3.70 yd³
        • As gravel: 3.70 × 1.4 = about 5.19 tons

        Order through the Gravel Calculator and it adds the buffer and rounds to how the yard actually sells it — but 3.70 yd³ is the true volume under the pad, and that's the number every quote should be built on.

        On a real job

        • Average your depths. Ground is never flat. Measure depth in four or five spots, add them up, divide by the count, and use that — a single deep corner can fool you by half a yard.
        • Measure the inside, not the outside. For a trench or a formed bed, measure the space the material actually fills — inside the forms, inside the trench walls.
        • Trenches: use the average width. Dug walls slump wider than the bucket. Measure the width at the top and at the bottom and split the difference.
        • Loose material settles. A yard of loose gravel compacts down once it's spread and driven on. That's what the ordering extra is for — the material calculators build it in.
        • Know what a load looks like. One cubic yard of gravel is roughly a full scoop and a heavy pickup load — most pickups are rated for well under the ~1.4 tons a yard of gravel weighs. Size the truck by weight, not just volume.
        • Write the exact number down. Quotes, tickets, and deliveries all drift from the plan. The exact volume is the one number that lets you check every one of them.

        Most Asked Questions

        How do I figure out cubic yards?

        Length × width × depth, with depth in feet, then divide by 27. Depth is usually measured in inches, so divide the inches by 12 first. A 10 × 10 ft bed filled 12 inches deep: 100 ft² × 1 ft = 100 ft³ ÷ 27 = 3.70 yd³.

        How many cubic feet are in a cubic yard?

        27 cubic feet. A cubic yard is a cube 3 ft long, 3 ft wide and 3 ft deep — 3 × 3 × 3 = 27. Every conversion on this page runs through that one fact.

        How much area does one cubic yard cover?

        At 4 inches deep, one yard covers about 81 sq ft; at 6 inches, about 54 sq ft. The thinner you spread it, the further it goes — which is why depth, not area, is where volume estimates usually go wrong.

        How much does a cubic yard weigh?

        This calculator estimates weight for two materials only: gravel at about 1.4 tons per cubic yard, and dry sand at about 1.35 tons. So the 3.70 yd³ bed above, as gravel, weighs about 5.19 tons. Wet material weighs more — treat it as a planning estimate for sizing a truck or trailer, not a scale ticket.

        Why does the extra start at 0%?

        Because this is a measuring tool, not an ordering tool. The headline number is the true volume — no extra added. Tap a percentage and the calculator shows the padded ordering figure separately, next to the exact one. The material calculators (gravel, concrete, mulch and the rest) are the ordering tools, and they handle the allowance their own way.

        How do I convert cubic yards to cubic meters?

        Multiply cubic yards by 0.764555. The 3.70 yd³ bed above is 2.83 m³. The calculator shows both units, and it also runs in reverse: enter a volume in cubic feet or cubic meters directly when a quote or drawing already gives you one.

        Next calculation

        One job usually leads to the next number. Common next steps from here:

        Embed this calculator on your site

        Run a DIY, contractor, or supplier site? Put this cubic yard calculator right on your page, free. Copy the code and paste it where you want it — your visitors get the numbers without leaving your site.

        Free to use. The small “Powered by Kipi Calculator” line at the bottom of the calculator stays on — that’s all we ask.