Kipi Calculator DECK CHART by Kipi Calculator
🌐 Español

Deck Materials for a 12×12 Deck

A 12×12 ft deck covers 144 ft². On this page the first number is the board-run length — the direction the deck boards run — and the second is the deck width the boards have to cross. Counts use the same math as the deck calculator: 5.5-in. boards with a 1/4-in. gap (5.75 in. of coverage each), joists at 16 in. on-center spaced along the length and running across the width, and 2 screws at every board-to-joist crossing.

12×12 deck: 26 boards, 12 ft long · 10 joists (12 ft each) · 520 screws · 2 boxes of screws — exact count, no waste added

Deck materials for a 12×12 deck

ItemCount
Deck boards (exact, 0% waste)26 × 12 ft
Deck boards with 10% waste — optional29 × 12 ft
Joists at 16 in. OC (each 12 ft long, running across the width)10
Screws (2 per board at every joist)520
Screw boxes, 5-lb (~350 screws each)2

How it is figured: boards across = 144 in. of width ÷ 5.75 in. per board = 25.04, rounded up to 26 boards, bought at the 12-ft stock length that covers the 12-ft run. Joists = 144 in. of length ÷ 16 in. spacing = 9 spaces, rounded up, plus 1 to close the end = 10 joists. Screws = 26 boards × 10 joists × 2 = 520.

The headline counts are exact — no waste is baked in. The calculator itself starts at 0% waste, and its waste chips raise the board count only (joists and screws stay on the exact layout, because you only screw down the boards you actually install). The 10% row above is there if you want that cushion: it is the same figure the calculator gives with its 10% chip tapped. Beams, posts, and footings are not figured here or by the calculator — they follow your spans and local requirements.

Common questions

How many deck boards do I need for a 12×12 deck?

26 boards, 12 ft long — the exact count at 0% waste. Each board covers 5.75 in. of the 12-ft width (5.5-in. board plus its 1/4-in. gap): 144 ÷ 5.75 rounds up to 26. With 10% waste for cuts and culls, buy 29.

How many joists and screws for a 12×12 deck?

10 joists at 16 in. on-center, spaced along the 12-ft length and each running 12 ft across the width (144 ÷ 16, rounded up, plus 1). Screws: 26 boards × 10 joists × 2 per crossing = 520 screws, which is 2 5-lb boxes of about 350.

Does it matter which way the boards run?

Yes — swapping the run changes the counts. This page runs the boards along the 12-ft side. Run them the other way and the board count, board length, and joist count all change; the deck calculator figures either direction from the length and width you enter.