Kipi Calculator DECK CHART by Kipi Calculator
🌐 Español

Deck Materials for a 14×14 Deck

A 14×14 ft deck covers 196 ft². On this page the first number is the board-run length — the direction the deck boards run — and the second is the deck width the boards have to cross. Counts use the same math as the deck calculator: 5.5-in. boards with a 1/4-in. gap (5.75 in. of coverage each), joists at 16 in. on-center spaced along the length and running across the width, and 2 screws at every board-to-joist crossing.

14×14 deck: 30 boards, 14 ft long · 12 joists (14 ft each) · 720 screws · 3 boxes of screws — exact count, no waste added

Deck materials for a 14×14 deck

ItemCount
Deck boards (exact, 0% waste)30 × 14 ft
Deck boards with 10% waste — optional33 × 14 ft
Joists at 16 in. OC (each 14 ft long, running across the width)12
Screws (2 per board at every joist)720
Screw boxes, 5-lb (~350 screws each)3

How it is figured: boards across = 168 in. of width ÷ 5.75 in. per board = 29.22, rounded up to 30 boards, bought at the 14-ft stock length that covers the 14-ft run. Joists = 168 in. of length ÷ 16 in. spacing = 10.5 spaces, rounded up, plus 1 to close the end = 12 joists. Screws = 30 boards × 12 joists × 2 = 720.

The headline counts are exact — no waste is baked in. The calculator itself starts at 0% waste, and its waste chips raise the board count only (joists and screws stay on the exact layout, because you only screw down the boards you actually install). The 10% row above is there if you want that cushion: it is the same figure the calculator gives with its 10% chip tapped. Beams, posts, and footings are not figured here or by the calculator — they follow your spans and local requirements.

Common questions

How many deck boards do I need for a 14×14 deck?

30 boards, 14 ft long — the exact count at 0% waste. Each board covers 5.75 in. of the 14-ft width (5.5-in. board plus its 1/4-in. gap): 168 ÷ 5.75 rounds up to 30. With 10% waste for cuts and culls, buy 33.

How many joists and screws for a 14×14 deck?

12 joists at 16 in. on-center, spaced along the 14-ft length and each running 14 ft across the width (168 ÷ 16, rounded up, plus 1). Screws: 30 boards × 12 joists × 2 per crossing = 720 screws, which is 3 5-lb boxes of about 350.

Does it matter which way the boards run?

Yes — swapping the run changes the counts. This page runs the boards along the 14-ft side. Run them the other way and the board count, board length, and joist count all change; the deck calculator figures either direction from the length and width you enter.