Kipi Calculator DECK CHART by Kipi Calculator
🌐 Español

Deck Materials for a 16×20 Deck

A 16×20 ft deck covers 320 ft². On this page the first number is the board-run length — the direction the deck boards run — and the second is the deck width the boards have to cross. Counts use the same math as the deck calculator: 5.5-in. boards with a 1/4-in. gap (5.75 in. of coverage each), joists at 16 in. on-center spaced along the length and running across the width, and 2 screws at every board-to-joist crossing.

16×20 deck: 42 boards, 16 ft long · 13 joists (20 ft each) · 1,092 screws · 4 boxes of screws — exact count, no waste added

Deck materials for a 16×20 deck

ItemCount
Deck boards (exact, 0% waste)42 × 16 ft
Deck boards with 10% waste — optional47 × 16 ft
Joists at 16 in. OC (each 20 ft long, running across the width)13
Screws (2 per board at every joist)1,092
Screw boxes, 5-lb (~350 screws each)4

How it is figured: boards across = 240 in. of width ÷ 5.75 in. per board = 41.74, rounded up to 42 boards, bought at the 16-ft stock length that covers the 16-ft run. Joists = 192 in. of length ÷ 16 in. spacing = 12 spaces, rounded up, plus 1 to close the end = 13 joists. Screws = 42 boards × 13 joists × 2 = 1,092.

The headline counts are exact — no waste is baked in. The calculator itself starts at 0% waste, and its waste chips raise the board count only (joists and screws stay on the exact layout, because you only screw down the boards you actually install). The 10% row above is there if you want that cushion: it is the same figure the calculator gives with its 10% chip tapped. Beams, posts, and footings are not figured here or by the calculator — they follow your spans and local requirements.

Common questions

How many deck boards do I need for a 16×20 deck?

42 boards, 16 ft long — the exact count at 0% waste. Each board covers 5.75 in. of the 20-ft width (5.5-in. board plus its 1/4-in. gap): 240 ÷ 5.75 rounds up to 42. With 10% waste for cuts and culls, buy 47.

How many joists and screws for a 16×20 deck?

13 joists at 16 in. on-center, spaced along the 16-ft length and each running 20 ft across the width (192 ÷ 16, rounded up, plus 1). Screws: 42 boards × 13 joists × 2 per crossing = 1,092 screws, which is 4 5-lb boxes of about 350.

Does it matter which way the boards run?

Yes — swapping the run changes the counts. This page runs the boards along the 16-ft side. Run them the other way and the board count, board length, and joist count all change; the deck calculator figures either direction from the length and width you enter.