Deck Materials for a 20×16 Deck
A 20×16 ft deck covers 320 ft². On this page the first number is the board-run length — the direction the deck boards run — and the second is the deck width the boards have to cross. Counts use the same math as the deck calculator: 5.5-in. boards with a 1/4-in. gap (5.75 in. of coverage each), joists at 16 in. on-center spaced along the length and running across the width, and 2 screws at every board-to-joist crossing.
Deck materials for a 20×16 deck
| Item | Count |
|---|---|
| Deck boards (exact, 0% waste) | 34 × 20 ft |
| Deck boards with 10% waste — optional | 38 × 20 ft |
| Joists at 16 in. OC (each 16 ft long, running across the width) | 16 |
| Screws (2 per board at every joist) | 1,088 |
| Screw boxes, 5-lb (~350 screws each) | 4 |
How it is figured: boards across = 192 in. of width ÷ 5.75 in. per board = 33.39, rounded up to 34 boards, bought at the 20-ft stock length that covers the 20-ft run. Joists = 240 in. of length ÷ 16 in. spacing = 15 spaces, rounded up, plus 1 to close the end = 16 joists. Screws = 34 boards × 16 joists × 2 = 1,088.
The headline counts are exact — no waste is baked in. The calculator itself starts at 0% waste, and its waste chips raise the board count only (joists and screws stay on the exact layout, because you only screw down the boards you actually install). The 10% row above is there if you want that cushion: it is the same figure the calculator gives with its 10% chip tapped. Beams, posts, and footings are not figured here or by the calculator — they follow your spans and local requirements.
Common questions
How many deck boards do I need for a 20×16 deck?
34 boards, 20 ft long — the exact count at 0% waste. Each board covers 5.75 in. of the 16-ft width (5.5-in. board plus its 1/4-in. gap): 192 ÷ 5.75 rounds up to 34. With 10% waste for cuts and culls, buy 38.
How many joists and screws for a 20×16 deck?
16 joists at 16 in. on-center, spaced along the 20-ft length and each running 16 ft across the width (240 ÷ 16, rounded up, plus 1). Screws: 34 boards × 16 joists × 2 per crossing = 1,088 screws, which is 4 5-lb boxes of about 350.
Does it matter which way the boards run?
Yes — swapping the run changes the counts. This page runs the boards along the 20-ft side. Run them the other way and the board count, board length, and joist count all change; the deck calculator figures either direction from the length and width you enter.