Kipi Calculator GRASS SEED CALCULATOR by Kipi Calculator

Grass Seed Calculator

    How are you measuring?

    Two ways in — pick the one that fits your job.

    Your lawn & your seed

    Size first, then the grass — the seeding rate depends on both.

    Odd-shaped lawn? Split it into rectangles and add the pieces — or work the area out in the Square Footage Calculator and enter the total here.

    What kind of seed?

    New lawn or overseeding?

    Bag size you'll buy

    Extra seed — a cushion for bare patches & touch-ups

    Seed is bought by weight, so the exact pounds are usually all you need. Add extra only if you've got bare patches to fill and touch-ups to do.

    Your seed order

    Order this much

    – lb of seed

    Rates are the standard published seeding rates in pounds per 1,000 sq ft. If the rate printed on your seed bag differs, the bag's label wins.

    Bags to buy
    –
    No extra added
    –
    Area to seed
    –
    Seeding rate
    –

      💡 Pro field tips

        🧰 Tools you'll need

        Tap to check off as you load up.

        Est. project cost (optional)

        File this estimate under a job name or PO to track what to order. Leave blank to file under "General".

        How the math works

        Grass seed is figured by weight, not by area alone — every grass type has a standard seeding rate in pounds per 1,000 square feet, and the job is just your lawn size times that rate.

        The rate: pounds per 1,000 sq ft

        Pounds of seed = (Square feet ÷ 1,000) × Rate

        The rates below are the standard published seeding rates used by extension services and seed suppliers. A new lawn on bare dirt takes the full rate; overseeding an existing lawn takes half, because half the ground is already covered by grass.

        Grass typeNew lawnOverseeding
        Kentucky bluegrass2 lb1 lb
        Perennial ryegrass8 lb4 lb
        Tall fescue8 lb4 lb
        Fine fescue5 lb2.5 lb
        Bermudagrass2 lb1 lb

        Why such a spread? Seed size. Bluegrass seed is tiny — a pound holds well over a million seeds — so a couple of pounds covers what takes eight pounds of the much bigger ryegrass and fescue seed. Always check the label on your actual bag: if its rate differs from the table, the bag wins.

        Bags: round up

        Seed is sold in full bags — 5, 10, 20, 25 and 50 lb are the common sizes — so the calculator divides your pounds by the bag size you pick and rounds up:

        Bags = Pounds ÷ Bag size, rounded up

        Why the extra starts at 0%

        Unlike sod or gravel, seed is bought by exact weight and the bag count already rounds you up — so the exact pounds are usually all you need, and the extra starts at 0%. Add 5–10% only when you're also filling bare patches or know you'll be touching up thin spots after the first sprout. And don't double-count: if you pad the area and add extra here, you're buying the cushion twice.

        Worked example: 50 × 100 lawn, tall fescue

        • Area: 50 × 100 = 5,000 sq ft
        • Seed: 5,000 ÷ 1,000 × 8 lb (tall fescue, new lawn) = 40 lb
        • Bags: 40 ÷ 20 lb bags = 2 bags

        Two 20-pound bags and the lawn is covered — no partial-bag guessing at the store.

        Worked example

        You're overseeding a 10,000 sq ft Kentucky bluegrass lawn that's gone thin. Using this calculator's own math:

        • Area: 10,000 sq ft
        • Overseeding rate for bluegrass: 1 lb per 1,000 sq ft
        • Seed: 10,000 ÷ 1,000 × 1 = 10 lb
        • Bags: 10 ÷ 10 lb bags = 1 bag

        One small bag thickens the whole lawn — overseeding is the cheapest lawn upgrade there is, as long as the seed actually reaches the soil.

        On a real job

        • Fall is the best seeding window. Warm soil, cool air, and far less weed pressure than spring. Spring seeding works too — just expect to fight crabgrass for the same ground.
        • Seed-to-soil contact is everything. Seed sitting on top of thatch rarely takes. Mow short, dethatch or aerate first on an overseed, and rake new seed in lightly so it touches dirt.
        • Keep it moist, not soaked. Light watering two or three times a day until it sprouts, then back off to deeper, less frequent soaking so roots chase the water down.
        • Cover bare-dirt seed lightly. A thin layer of straw or peat moss — about ¼ inch — holds moisture and keeps birds off. Too deep and the seed never sees daylight.
        • Match the grass to the yard. Fine fescue for shade, bermuda for hot southern yards, tall fescue for tough high-traffic lawns. The right grass at the right rate beats extra seed of the wrong kind.
        • Starter fertilizer goes down with the seed. New seedlings need phosphorus to build roots — a starter formula at seeding time is the one feeding that really matters.

        Most Asked Questions

        How much grass seed do I need for a 5,000 sq ft lawn?

        40 lb of tall fescue for a new lawn — two 20-lb bags. The math is area ÷ 1,000 × the seeding rate: 5,000 ÷ 1,000 × 8 lb (tall fescue, new lawn) = 40 lb. Seed is sold in full bags, so the calculator divides by your bag size and rounds up.

        What is the difference between a new-lawn rate and an overseeding rate?

        Overseeding takes half the new-lawn rate. Half the ground is already covered by grass, so you need half the seed: tall fescue drops from 8 lb per 1,000 sq ft on bare dirt to 4 lb for overseeding, and Kentucky bluegrass drops from 2 lb to 1 lb.

        How much seed does overseeding a 10,000 sq ft bluegrass lawn take?

        Just 10 lb — one 10-lb bag. The overseeding rate for Kentucky bluegrass is 1 lb per 1,000 sq ft, so 10,000 ÷ 1,000 × 1 = 10 lb. Overseeding is the cheapest lawn upgrade there is, as long as the seed actually reaches the soil.

        Why do seeding rates vary so much by grass type?

        Seed size. Bluegrass seed is tiny — a pound holds well over a million seeds — so 2 lb covers what takes 8 lb of the much bigger ryegrass and fescue seed. Always check the label on your actual bag: if its rate differs from the table, the bag wins.

        Which grass seed should I pick for my yard?

        Match the grass to the yard, not the other way around. Fine fescue for shade, bermudagrass for hot southern yards, and tall fescue for tough, high-traffic lawns. The right grass at the right rate beats extra seed of the wrong kind every time.

        Why does the extra start at 0%?

        Seed is bought by exact weight, and the bag count already rounds you up. The exact pounds are usually all you need. Add 5–10% only when you are also filling bare patches or know you will be touching up thin spots after the first sprout — and do not pad the area and add extra, or you buy the cushion twice.

        Next calculation

        One job usually leads to the next number. Common next steps from here:

        Embed this calculator on your site

        Run a DIY, contractor, or supplier site? Put this grass seed calculator right on your page, free. Copy the code and paste it where you want it — your visitors get the numbers without leaving your site.

        Free to use. The small “Powered by Kipi Calculator” line at the bottom of the calculator stays on — that’s all we ask.