Kipi Calculator KITCHEN REMODEL ESTIMATOR by Kipi Calculator
🌐 Español

Kitchen Remodel Calculator

    Tell me about the kitchen

    Cabinets, counters, and what's in scope — we'll price the rest by tier.

    Countertop material

    What's in scope?

    Pick your finish tier

    This sets the price level for every line item.

    Who's doing the work?

    Labor is the biggest variable in any remodel.

    Your kitchen budget

    Estimated budget

    –

    Cabinets
    –
    Countertop
    –
    Fixtures & finishes
    –
    Materials subtotal
    –
    Labor
    –
    Est. budget
    –

      💡 Pro field tips

        🧰 Tools you'll need

        Tap to check off as you load up.

        File this estimate under a job name or PO to track what to order. Leave blank to file under "General".

        How the math works

        A kitchen remodel budget is built from five buckets — cabinets, countertops, appliances, flooring and finishes, and labor — each estimated its own way, then added together. There is no single formula for "a kitchen" because a $15,000 refresh and a $75,000 gut job are different projects wearing the same name. This calculator estimates each bucket from your kitchen's size and your chosen finish tier, so the total reflects the kitchen you actually want, not some national average.

        Step 1: The per-square-foot ballpark (background)

        Remodelers quote kitchens in dollars per square foot of floor area, and the tier sets the range: a cosmetic refresh (paint, hardware, new counters on old boxes) runs roughly $75–$150 per sq ft, a mid-range remodel with new semi-custom cabinets runs $150–$300, and a high-end gut with custom everything runs $300–$500+. This calculator skips the per-square-foot shortcut: it builds the estimate bucket by bucket from the numbers you enter below, so you can see where the money actually goes.

        Step 2: Cabinets — the biggest bucket

        Cabinets typically eat 30–40% of the total budget — the largest single share. The calculator prices them by linear foot: stock cabinets roughly $100–$200 per linear foot installed, semi-custom $200–$500, custom $500–$1,000+. A 20-linear-foot kitchen at the mid-range rate ($200/ft) puts $4,000 in the cabinet bucket. This is why keeping the existing layout saves so much money — moving plumbing and walls does not change the cabinet math, but it detonates the labor bucket.

        Step 3: Countertops by the square foot

        Countertop cost is area × material rate: laminate $20–$50/sq ft, granite $40–$100, quartz $50–$150, marble $75–$200+. The area comes from linear feet of base cabinets times the standard counter depth the calculator uses: 25 inches (about 2.083 ft, including the front overhang). Material choice swings this bucket by thousands on the exact same kitchen — it is the highest-leverage decision in the whole remodel.

        Step 4: Appliances, priced per appliance

        Appliances do not scale with kitchen size — they scale with how many you replace. The calculator prices them per appliance, times the count you enter: $600 each on the budget tier, $1,200 each mid-range, $2,500 each high-end. Three mid-range appliances come to $3,600 — and a budget kitchen never gets priced with a $20,000 range in it.

        Step 5: Labor and the reality check

        Labor runs 20–35% of the total — higher when walls move or plumbing relocates. The calculator offers DIY vs. pro labor because sweat equity is real money: DIY can cut the labor bucket by half or more on cosmetic work, but electrical, plumbing, and gas still belong to licensed pros in most places. Add the buckets up — that total is the estimate. If it lands far outside the per-square-foot ranges from Step 1, one of your tier assumptions is probably off.

        Worked example

        A mid-range kitchen with 20 linear feet of base cabinets, quartz counters, 3 appliances and a sink, figured with pro labor: cabinets 20 × $200 = $4,000; counters 41.67 sq ft × $75 quartz = $3,125; appliances 3 × $1,200 = $3,600; sink $350. Materials total $11,075; pro labor adds 50% of materials, $5,538. Total: $16,613.

        Most Asked Questions

        What does the calculator's mid-range worked example come to?

        About $16,613, all in. That is 20 linear feet of cabinets at the mid-range $200 per linear foot ($4,000), 41.67 sq ft of quartz counters at $75 per sq ft (about $3,125), 3 appliances at $1,200 each ($3,600), and a $350 sink — $11,075 in materials, plus pro labor at 50% of materials, $5,538.

        What is the biggest cost in a kitchen remodel?

        Cabinets — typically 30–40% of the total budget. That is why the calculator prices them by the linear foot, base plus wall runs together: $100 per linear foot on the budget tier, $200 mid-range, and $400 high-end. Keeping your existing layout saves so much because it protects this bucket and the labor bucket at the same time.

        How are countertops priced in the estimate?

        By the square foot, from your base-cabinet run. The area is linear feet of base cabinets × the standard 25-inch counter depth: 20 ft of base gives 41.67 sq ft. The material rate does the swinging — laminate is $25 per sq ft in this calculator, butcher block $45, quartz $75, and granite $100 — thousands of dollars apart on the exact same kitchen.

        How does the calculator price appliances?

        Per appliance, by tier — not by kitchen size. Each appliance you count is figured at $600 on the budget tier, $1,200 mid-range, or $2,500 high-end, times the count you enter. Three mid-range appliances come to $3,600, and a budget kitchen never gets priced with a high-end range in it.

        How is labor figured — DIY versus hiring a pro?

        Pro labor adds 50% on top of materials; DIY adds $0 of labor cost. Pick “Hire a pro” and the total is materials × 1.5; pick DIY and the total is the materials themselves. Sweat equity is real money on cosmetic work — but electrical, plumbing, and gas still belong to licensed pros in most places.

        What extras can I add to the estimate?

        Backsplash, flooring, paint, and electrical and plumbing updates — each priced its own way. Backsplash and flooring go by the square foot (mid-range: $15 and $9 per sq ft in this calculator), while paint, electrical, and plumbing are flat tier allowances. Untick anything you are not doing and the bucket leaves the total.

        Next calculation

        One job usually leads to the next number. Common next steps from here:

        Embed this calculator on your site

        Run a DIY, contractor, or supplier site? Put this kitchen remodel calculator right on your page, free. Copy the code and paste it where you want it — your visitors get the numbers without leaving your site.

        Free to use. The small “Powered by Kipi Calculator” line at the bottom of the calculator stays on — that’s all we ask.