Sand for a 10×10 Area
A 10×10 ft area covers 100 ft². Sand is figured by volume, then converted at 100 lb per cubic foot for dry play and all-purpose sand — 2,700 lb, or 1.35 tons, per cubic yard — the same math as the sand calculator. One inch suits paver bedding and jointing; 2–4 in. is the range for sandboxes, leveling, and under-pool pads.
Sand for a 10×10 area by depth
| Depth | Cubic feet | Cubic yards | Tons | 50-lb bags | 60-lb bags |
|---|---|---|---|---|---|
| 1 in. | 8.33 | 0.31 | 0.42 | 17 | 14 |
| 2 in. | 16.67 | 0.62 | 0.83 | 34 | 28 |
| 3 in. | 25 | 0.93 | 1.25 | 50 | 42 |
| 4 in. | 33.33 | 1.23 | 1.67 | 67 | 56 |
How it is figured at 2 in.: volume = 10 × 10 × (2 ÷ 12) = 16.67 ft³, and 16.67 ÷ 27 = 0.62 yd³. Weight = 16.67 ft³ × 100 lb = 1,667 lb = 0.83 tons. Bags divide the pounds and round up — 34 at 50 lb, 28 at 60 lb. Masonry sand runs a little heavier (about 105 lb/ft³) and wet sand heavier still (about 120) — pick those types in the calculator for those weights.
Every count on this page is exact — no waste is baked in. The calculator itself starts at 0%; its waste selector pads the tonnage only when you tap it. Sand does compact, spill, and disappear into uneven ground, so ordering about 10% extra is common — add it on purpose, not by surprise.
Common questions
How much sand do I need for a 10×10 area?
At 2 in. deep: 0.62 cubic yards, 0.83 tons — or 34 bags of 50 lb (28 of 60 lb). At 4 in. deep it doubles: 1.23 yd³ and 1.67 tons.
How much does a cubic yard of sand weigh?
About 2,700 lb — roughly 1.35 tons — dry, at 100 lb per cubic foot. That is the density this chart and the calculator use for play and all-purpose sand. Wet sand can top 3,200 lb per yard.
Should I buy sand in bags or in bulk?
Under about half a ton, bags are simpler. This area at 2 in. deep is 0.83 tons — past that line, so a bulk delivery is usually cheaper per pound than 34 bags.