Kipi Calculator SAND CHART by Kipi Calculator
🌐 Español

Sand for a 12×12 Area

A 12×12 ft area covers 144 ft². Sand is figured by volume, then converted at 100 lb per cubic foot for dry play and all-purpose sand — 2,700 lb, or 1.35 tons, per cubic yard — the same math as the sand calculator. One inch suits paver bedding and jointing; 2–4 in. is the range for sandboxes, leveling, and under-pool pads.

12×12 at 2 in. deep: 0.89 yd³ · 1.2 tons · 48 bags of 50 lb · 40 bags of 60 lb — exact counts, no waste added

Sand for a 12×12 area by depth

DepthCubic feetCubic yardsTons50-lb bags60-lb bags
1 in.120.440.62420
2 in.240.891.24840
3 in.361.331.87260
4 in.481.782.49680

How it is figured at 2 in.: volume = 12 × 12 × (2 ÷ 12) = 24 ft³, and 24 ÷ 27 = 0.89 yd³. Weight = 24 ft³ × 100 lb = 2,400 lb = 1.2 tons. Bags divide the pounds and round up — 48 at 50 lb, 40 at 60 lb. Masonry sand runs a little heavier (about 105 lb/ft³) and wet sand heavier still (about 120) — pick those types in the calculator for those weights.

Every count on this page is exact — no waste is baked in. The calculator itself starts at 0%; its waste selector pads the tonnage only when you tap it. Sand does compact, spill, and disappear into uneven ground, so ordering about 10% extra is common — add it on purpose, not by surprise.

Common questions

How much sand do I need for a 12×12 area?

At 2 in. deep: 0.89 cubic yards, 1.2 tons — or 48 bags of 50 lb (40 of 60 lb). At 4 in. deep it doubles: 1.78 yd³ and 2.4 tons.

How much does a cubic yard of sand weigh?

About 2,700 lb — roughly 1.35 tons — dry, at 100 lb per cubic foot. That is the density this chart and the calculator use for play and all-purpose sand. Wet sand can top 3,200 lb per yard.

Should I buy sand in bags or in bulk?

Under about half a ton, bags are simpler. This area at 2 in. deep is 1.2 tons — past that line, so a bulk delivery is usually cheaper per pound than 48 bags.