Sod Calculator
How are you measuring?
Two ways in — pick the one that fits your job.
Pick how you'll measure to continue.
How big is the lawn?
Measure in a few spots — yards are rarely square.
Odd-shaped lawn? Split it into rectangles, add up the pieces, and enter the total square footage.
Waste allowance — extra for cuts, curves & damaged pieces
Your sod order
Order this much
– rolls
One standard roll = 2 ft × 5 ft = 10 sq ft. One pallet covers 450 sq ft — coverage varies by supplier (450–500 sq ft), so confirm when you order.
- Pallets
- –
- No waste added
- –
- Area to cover
- –
- Square yards
- –
💡 Pro field tips
🧰 Tools you'll need
Tap to check off as you load up.
Est. project cost (optional)
File this estimate under a job name or PO to track what to order. Leave blank to file under "General".
Copied to clipboard ✓
How the math works
Sod is sold by the roll and shipped by the pallet, and the two don't line up the way you'd expect — a pallet holds roughly 45 rolls, but not exactly, so the calculator does the rounding for you. The only measurement you need is the area of your lawn.
Area: length × width
Measure a rectangle in feet and multiply:
Square feet = Length (ft) × Width (ft)
A 25 × 40-foot lawn is 25 × 40 = 1,000 square feet. For a yard with curves or an L-shape, split it into rectangles, figure each piece, and add them together. If you already know the square footage — from a quote, a survey, or the sod farm's own measure — enter it directly.
The roll: 2 ft × 5 ft = 10 sq ft
The standard sod roll is 2 feet wide and 5 feet long, which is 10 square feet per roll. It's the unit every farm cuts to, so rolls are how you order:
Rolls = Square feet ÷ 10
The pallet: about 450 sq ft
Sod ships on pallets, and a pallet usually covers about 450 square feet — roughly 45 rolls. Coverage varies by supplier and by grass type, roughly 450–500 square feet per pallet, so confirm coverage with your farm when you order. Because sod arrives on full pallets, the calculator always rounds pallets up:
Pallets = Square feet ÷ 450, rounded up
Waste: the 10% rule
Cutting around curves, trimming edges, and the pieces that crack or dry out before they go down means you always need more than the raw area. A 10% buffer is the standard for a typical lawn — more for a yard full of curves and beds:
Square feet to cover = Square feet × 1.10
Square yards, for quotes
Some sod farms price by the square yard. One square yard is 9 square feet:
Square yards = Square feet ÷ 9
Worked example: 25 × 40 lawn
- Area: 25 × 40 = 1,000 sq ft
- With the 10% waste buffer: 1,000 × 1.10 = 1,100 sq ft to cover
- Rolls: 1,100 ÷ 10 = 110 rolls
- Pallets: 1,100 ÷ 450 = 2.44 → round up to 3 pallets
- Square yards: 1,000 ÷ 9 = 111.1 yd²
Three pallets, one delivery, and you've got the full lawn — with enough left over for the edges that didn't fit.
Worked example
You're sodding a 20 × 30 ft front yard. Using this calculator's own math:
- Area: 20 × 30 = 600 sq ft
- With the 10% waste buffer: 600 × 1.10 = 660 sq ft to cover
- Rolls: 660 ÷ 10 = 66 rolls
- Pallets: 660 ÷ 450 = 1.47 → round up to 2 pallets
- Square yards: 600 ÷ 9 = 66.7 yd²
Two pallets cover it — the second pallet isn't full, but ordering one pallet short means running dry with bare dirt at the end of the yard.
On a real job
- Prep the ground first. Kill or strip the old grass, rake out rocks, and level the soil before the sod truck shows up. Thin or rocky soil is worth a layer of topsoil first — the sod roots into whatever it's sitting on.
- Lay sod the day it's delivered. Rolls heat up and die fast sitting on the pallet — especially in summer. If the truck shows up, the sod goes down the same day.
- Stagger the seams like bricks. Offset each row so the joints don't line up, and butt the edges tight with no gaps and no overlap. Gaps dry out and show as brown lines.
- Water immediately, then keep it wet. Soak it the same day it goes down, and keep the soil moist — not puddled — for the first two weeks while roots take hold.
- Roll it with a lawn roller. A pass with a roller presses the roots into full contact with the soil, which is what makes sod take hold instead of sitting on top and drying out.
- Don't mow too soon. Wait until the sod resists a gentle tug — roots anchored — then mow high. Cutting it short while it's still rooting starves the new grass.
Most Asked Questions
How many rolls of sod do I need for 1,000 sq ft?
100 rolls at the exact count. A standard roll covers 10 sq ft, so 1,000 ÷ 10 = 100. Tap the +10% chip — the standard buffer for cutting around curves and edges — and the order becomes 110 rolls.
How big is one roll of sod?
2 ft wide × 5 ft long = 10 sq ft. That's the standard cut sod farms use, and it's the unit this calculator counts in. If your supplier cuts a different size, go by their square-foot coverage per roll instead.
How many square feet come on a pallet of sod?
About 450 sq ft per pallet — roughly 45 rolls. Coverage varies by supplier and grass type, roughly 450 to 500 sq ft, so confirm it when you order. The calculator figures 450 and always rounds up to whole pallets.
Why did my pallet count round up?
Because sod ships on full pallets — there's no half-pallet delivery. A 1,100 sq ft order (1,000 sq ft with the +10% buffer) is 1,100 ÷ 450 = 2.44 pallets of material, so the truck brings 3. Ordering one pallet short instead leaves bare dirt at the far end of the yard.
How much extra sod should I order?
The calculator starts at 0% — the exact count — and +10% is the standard buffer to tap. Cutting around curves and beds eats pieces, and rolls that crack or dry out before they're laid are lost. A yard full of curves deserves more than 10%.
My sod farm prices by the square yard — how do I convert?
Divide square feet by 9. The calculator shows the conversion for you: the 1,000 sq ft lawn above is about 111 yd². Just make sure the farm's quote and your measurement are in the same unit before you compare prices.