Kipi Calculator SQUARE FOOTAGE CALCULATOR by Kipi Calculator

Square Footage Calculator

    What shape is it?

    Pick the shape that matches your space.

    How big is it?

    Fractions work — type 10 1/2 and we'll convert it.

    Extra for ordering — this tool measures the exact area, so it starts at 0%. Add a few % only if you're turning this number into a material order.

    Your area

    The area is

    – ft²

    One square foot is a square 1 ft × 1 ft. Flooring, tile, paint, and sod all start from this number — it's the first measurement on almost every job.

    Square yards
    –
    Square meters
    –

    📐 Got your square feet? Put them to work

    Flooring, tile, paint, drywall and yard cover all start from this number — each calculator takes your area and figures the material — each one starts at 0% waste, so add the % you want there.

      💡 Pro field tips

        🧰 Tools you'll need

        Tap to check off as you load up.

        File this area under a job name or PO. Leave blank to file under "General".

        How the math works

        Almost every material conversation on a job starts with one number: how many square feet. Flooring is sold by it, paint coverage is rated by it, sod and seed are figured from it. This calculator gets that number for the four shapes real spaces actually come in — and converts it to square yards, square meters, and acres.

        Rectangle: length × width

        Area = Length × Width

        A 12 × 15 ft room is 12 × 15 = 180 ft². Measure in feet — fractions like 10 1/2 work in the fields above.

        Circle: π × radius² — starting from the diameter

        Nobody measures a radius in the field. You measure straight across the middle — that's the diameter — so this calculator takes the diameter and halves it:

        Radius = Diameter ÷ 2

        Area = π × Radius²

        A 20 ft round patio: radius 10 ft, area = π × 10² = 314.16 ft².

        Triangle: (base × height) ÷ 2

        Area = (Base × Height) ÷ 2

        The height is the straight-line distance from the base to the opposite corner — perpendicular to the base, not along the slanted side. A gable end 10 ft wide and 8 ft tall: (10 × 8) ÷ 2 = 40 ft².

        L-shapes: split and add

        An L-shape is just two rectangles. Split it at the inside corner, figure each rectangle, and add: a 10 × 10 ft section plus a 5 × 8 ft section is 100 + 40 = 140 ft². The same trick handles U-shapes and rooms with a bump-out — keep splitting until every piece is a rectangle.

        The conversions

        • Square yards = Square feet ÷ 9 — one square yard is 3 ft × 3 ft. Carpet and some fabrics are sold this way.
        • Square meters = Square feet × 0.092903.
        • Acres = Square feet ÷ 43,560 — shown once the area passes 1,000 ft², where land measuring starts to make sense. An acre is a square about 208.7 ft on each side.

        Why the "extra" starts at 0% here

        This is a measuring tool, not an ordering tool — its job is the exact area, so the extra-for-ordering setting starts at 0% and the headline number is the true area. The material calculators on this site (flooring, tile, sod, and the rest) are ordering tools, and they start at 0% waste too — you add the % you want there. Two rules follow: if you're ordering straight off this number, add 5–10% here for cuts and breakage — and if you're taking the number into one of the material calculators, leave it at 0% here so the waste doesn't get counted twice.

        Worked example: a 12 × 15 ft room

        • Area: 12 × 15 = 180 ft²
        • Square yards: 180 ÷ 9 = 20 yd²
        • Square meters: 180 × 0.092903 = 16.72 m²
        • With 10% extra for ordering: 180 × 1.10 = 198 ft²

        Worked example

        You're flooring an L-shaped kitchen and dining space. Split at the inside corner, it's a 10 × 10 ft section and a 5 × 8 ft section. Using this calculator's own math:

        • Section 1: 10 × 10 = 100 ft²
        • Section 2: 5 × 8 = 40 ft²
        • Total: 100 + 40 = 140 ft²
        • Square yards: 140 ÷ 9 = 15.56 yd²

        Take the exact 140 ft² into the Flooring Calculator and it adds the cutting waste and turns the area into boxes — don't add waste here first, or you'll buy it twice.

        On a real job

        • Measure both ends of the room. Walls are rarely parallel. If one end reads 12 ft and the other 12 ft 4 in, use the bigger number — the material has to cover the worst of it.
        • Don't subtract the small stuff. Doorways, vents, and posts are rounding errors. Only subtract a footprint that will never be covered — a kitchen island on a flooring job, a tub surround on tile.
        • Round up, not down. Take each measurement to the next inch. A room that's really 179 ft² buys exactly like a 180 ft² room, but a short measurement leaves you short.
        • Diameter goes through the center. On a circle, an off-center tape reads short. Find the widest pass across the middle — that's the diameter.
        • Land: walk it in rectangles. Odd-shaped lots split into rectangles and triangles the same way rooms do. Add the pieces and the acres line takes care of itself.
        • Write the exact number down. Quotes, material lists, and bids all drift from the plan. The exact square footage is the one number that lets you check every one of them.

        Most Asked Questions

        How do I figure the square footage of a room?

        Length × width — a 12 × 15 ft room is 180 ft². Measure in feet; fractions like 10 1/2 work in the fields above.

        How do I get square yards or square meters?

        The calculator converts for you. That 180 ft² room is 20 yd² and 16.72 m² — square yards are ft² ÷ 9, square meters are ft² × 0.092903. On big areas it also shows acres once you pass 1,000 ft²: a 100 × 200 ft lot is 20,000 ft² = 0.4591 acres.

        How do I measure a round patio or pad?

        Measure straight across the middle — that's the diameter. A 20 ft circle figures to 314.16 ft²: the calculator halves the diameter for the radius and runs π × radius².

        How do I figure an L-shaped room?

        Split it into two rectangles and add. A 10 × 10 ft section plus a 5 × 8 ft section is 100 + 40 = 140 ft². The L-shape option above does exactly that split for you.

        How do I figure a gable end or another triangle?

        (Base × height) ÷ 2. A gable 10 ft wide and 8 ft tall is 40 ft². The height is measured straight up from the base — perpendicular to it, not along the slanted side.

        Is the square footage exact, or does it add extra?

        Always exact — nothing is added on its own. Tap a chip only if you want an order figure with extra built in: 180 ft² at +10% becomes 198 ft² for ordering.

        Next calculation

        One job usually leads to the next number. Common next steps from here:

        Embed this calculator on your site

        Run a DIY, contractor, or supplier site? Put this square footage calculator right on your page, free. Copy the code and paste it where you want it — your visitors get the numbers without leaving your site.

        Free to use. The small “Powered by Kipi Calculator” line at the bottom of the calculator stays on — that’s all we ask.