Kipi Calculator STAIN & SEALER ESTIMATOR by Kipi Calculator
🌐 Español

Stain Calculator

    What are you staining?

    Pick the surface — coverage math is the same, the prep isn't.

    How much surface?

    Total area getting stain, all coats included later.

    Length × width of every surface, added together.

    How many coats?

    Two thin coats outlast one thick coat every time.

    Waste allowance Starts at 0% — tap to add a percentage if you want one.

    Your stain order

    Buy this much

    – gal

    Total area
    –
    Coats
    –
    Exact gallons
    –
    Buy
    –

      💡 Pro field tips

        🧰 Tools you'll need

        Tap to check off as you load up.

        Est. project cost (optional)

        File this estimate under a job name or PO to track what to order. Leave blank to file under "General".

        How the math works

        Stain math is one division and one multiplication: divide your area by what a gallon covers, multiply by the coats, then round up to whole gallons — stain is sold by the gallon, and a half-empty can is next year's touch-up supply.

        Coverage: 300 square feet per gallon, per coat

        Gallons per coat = Area (sq ft) ÷ 300

        That 300 sits inside the 250–350 sq ft range most makers print on the can. Rough, weathered, or never-stained wood drinks more than smooth new wood — that is what the buffer below is for.

        Coats multiply the gallons

        Exact gallons = (Area ÷ 300) × Coats

        Two coats is the standard for fences, decks, and siding: the first coat soaks in and seals, the second evens out the color and carries the sun protection.

        The buffer factor

        The buffer starts at 0% — nothing is added until you tap a chip above the results. Buy = Exact gallons × (1 + buffer %), rounded UP to whole gallons. Tap 5–20% for rough wood, sprayer loss, and touch-ups.

        Worked example

        A 400 sq ft fence, 2 coats: 400 ÷ 300 = 1.33 gallons per coat, × 2 coats = 2.67 gallons exact, and the buy amount rounds up to 3 gallons with no buffer added. With the 10% buffer tapped: 2.67 × 1.10 = 2.94 → still buy 3 gallons.

        Most Asked Questions

        How much stain do I need for a 400 sq ft fence?

        3 gallons for two coats. The calculator figures 300 sq ft per gallon per coat: 400 ÷ 300 = 1.33 gallons per coat, × 2 coats = 2.67 gallons exact, and the buy amount rounds up to whole gallons — 3 gallons with no buffer added.

        How many square feet does a gallon of stain cover?

        300 sq ft per gallon, per coat, in this calculator. That sits inside the 250–350 sq ft range most stain makers print on the can. Rough, weathered or never-stained wood drinks more than smooth new wood, so lean on the buffer for thirsty wood.

        Do I need one coat or two?

        Two coats is the standard for fences, decks and siding. The first coat soaks in and seals; the second evens out the color and carries the sun protection. One coat can work for a refresh over sound, same-color stain — pick 1 or 2 coats above and the gallon count follows.

        Does the calculator add extra stain automatically?

        No — the buffer starts at 0%, and the results say so. The buy amount is just the exact gallons rounded up. Tap 5–20% above the results to add a buffer for rough wood, sprayer loss and touch-ups; the Buy tile and the notice always show the exact percentage included.

        How much stain for a deck — do I count both sides?

        Count every surface the stain will touch, in square feet. For a deck that's the deck boards plus any steps and railings you plan to coat; for a fence, one side or both sides depending on the job. Add the areas together and enter the total — the surface you pick doesn't change the math, the label is just for your saved estimate.

        Can I enter square meters?

        Yes — tap the m² toggle on the area step. Your entry converts at 1 m² = 10.7639 sq ft and the math runs the same; the results still come out in gallons, since stain is sold by the gallon.

        Next calculation

        One job usually leads to the next number. Common next steps from here:

        Embed this calculator on your site

        Run a DIY, contractor, or supplier site? Put this stain calculator right on your page, free. Copy the code and paste it where you want it — your visitors get the numbers without leaving your site.

        Free to use. The small “Powered by Kipi Calculator” line at the bottom of the calculator stays on — that’s all we ask.