Studs for a 60 Foot Wall
A plain 60-foot wall with no doors or windows needs 46 studs at 16″ on-center or 31 studs at 24″ on-center — before corners and openings. That is the exact count. With 15% waste & cull added, you would order 53 (16″) or 36 (24″).
Stud count for a 60 foot wall
| Spacing | Bays | Studs (exact) | With 15% waste & cull |
|---|---|---|---|
| 16″ on-center | 45 | 46 | 53 |
| 24″ on-center | 30 | 31 | 36 |
How the count is figured
The wall is 720 inches long. At 16″ spacing that is 720 ÷ 16 = 45 bays, which rounds up to 45 bays. The +1 rule: every run of bays needs one extra starter stud, so 45 + 1 = 46 studs. That is the count framers actually use — forgetting the +1 is the #1 rookie mistake.
Plates: one bottom plate plus a double top plate = 3 rows × 60 ft = 180 linear feet of plate lumber for this wall.
Openings and corners are extra: add 3 studs per corner, 4 per door (2 kings + 2 jacks), and 6 per window (2 kings + 2 jacks + 2 sill cripples). The full stud calculator adds those for you.
Keep figuring
Common questions
How many studs do I need for a 60 foot wall?
A plain 60 ft wall needs 46 studs at 16 in. on-center or 31 at 24 in. on-center, plus 180 linear feet of plates. That is the exact count. With the common 15% waste & cull allowance added, the order comes to 53 (16 in.) or 36 (24 in.).
Does wall height change the stud count?
No — height changes the length of each stud, not how many you need. Count comes from wall length and spacing only. An 8 ft wall typically uses 92 5/8 in. precut studs; taller walls use longer lumber at the same count.
How much extra should I order for waste?
Start from the exact count — 46 studs at 16 in. spacing for this wall — and add only what you want. 15% is a common framing allowance for culls, miscuts, and the odd warped board; at 16 in. spacing it brings the order to 53 studs.