Kipi Calculator TILE CHART by Kipi Calculator
🌐 Español

Tiles for a 10×10 Floor

A 10×10 ft floor is 100 ft². Counts below use the same tile sizes as the tile calculator, with waste figured in — 10% waste for a straight lay, 15% for a diagonal lay, where the angled cuts eat more tile.

10×10 floor: 111 tiles at 12×12 straight (115 diagonal) · 1 bag of thinset · 2 bags of grout

Tiles for a 10×10 floor

ItemCount
Tiles 12×12 — straight lay (+10%)111
Tiles 12×12 — diagonal lay (+15%)115
Tiles 12×24 — straight lay (+10%)56
Tiles 12×24 — diagonal lay (+15%)58
Tiles 6×6 — straight lay (+10%)441
Tiles 6×6 — diagonal lay (+15%)460
Thinset, 50-lb bags (~100 ft² each)1
Grout, 25-lb bags (~90 ft² each)2

The waste factor covers cuts and breakage only. If the room is cut up with closets, an island, or a tub in the middle, measure those areas out or add another 5% — and keep a few spare tiles from the same dye lot for future repairs.

Common questions

How many tiles do I need for a 10×10 floor?

With 12×12 tiles: 111 laid straight or 115 on a diagonal, for 100 ft². Add 1 bag of thinset and 2 bags of grout.

How much extra tile does a diagonal layout need?

Diagonal (45°) layouts are figured at 15% waste instead of 10% — nearly every edge tile gets cut. On this floor that is the difference between 111 and 115 tiles at 12×12.