Insulation Calculator
Where's it going?
Attic floor or walls — pick one.
Pick a location to continue.
How big is the area?
Length × width of the space you're insulating.
Pick your R-value
Higher R = better insulation. Match what your climate needs.
Pick an R-value to continue.
Your insulation count
Waste allowance Starts at 0% — tap to add a cushion for cuts & waste.
Buy this many rolls
–
- Area
- –
- Exact rolls
- –
- With 5% waste
- –
- Coverage / roll
- –
💡 Pro field tips
🧰 Tools you'll need
Tap to check off as you load up.
Est. project cost (optional)
File this estimate under a job name or PO to track what to order. Leave blank to file under "General".
Copied to clipboard ✓
How the math works
Insulation math does two jobs: how much material covers your space, and whether it actually keeps you warm. The second part is the R-value — thermal resistance, or how stubbornly the insulation refuses to let heat through. Bigger R, warmer house. Double the R-value roughly halves heat loss.
Coverage area
Area = Length × Width
A 1,000 sq ft attic needs 1,000 sq ft of insulation. For walls, enter the net area: length × height with the windows and doors subtracted. This calculator has no openings field, so do that subtraction yourself before you enter the numbers — you don't insulate glass, and every opening you subtract is money saved.
Rolls: how this calculator counts
This calculator counts rolls of blanket insulation. A standard roll is 15 inches wide × 32 feet long and covers 40 sq ft — the 15-inch width is made to fit between studs or joists framed 16" on center. (Batts in packages and blown-in by the bag are sold and counted differently; this tool's answer is rolls.)
Rolls = Area ÷ 40, rounded UP
400 sq ft of wall: 400 ÷ 40 = 10 → 10 rolls.
Waste factor
Rolls get trimmed around outlets, pipes, and joist ends, and the last cut off a roll rarely lands exactly. This calculator starts at 0% — the exact count, nothing added. Add a cushion with the waste chips (10% is the common pick for cuts and seams):
Buy = Exact rolls × (1 + waste %), rounded UP
Worked example: 1,000 sq ft attic
- Rolls: 1,000 ÷ 40 = 25 exact; with 10% waste added: 25 × 1.10 = 27.5 → buy 28 rolls
- Fit check: unroll along the joist bays and cut to length — a 15-inch roll sits snug between 16-inch on-center framing without compressing, and a compressed roll loses R-value
Most Asked Questions
How many rolls do I need for a 720 sq ft attic?
18 rolls, exact. Each roll covers 40 sq ft, so 720 ÷ 40 = 18 — with no waste added unless you tap a chip.
How much does one roll cover?
40 square feet. A standard roll is 15 inches wide × 32 ft long, made to fit between studs or joists framed 16″ on center. This calculator counts rolls — batts in packages and blown-in by the bag are counted differently.
Does the R-value change how many rolls I need?
No — the count is area ÷ 40 either way. R-13, R-30, and R-38 all figure at 40 sq ft per roll here; the R-value you pick labels your result. Choose the R your climate and cavity depth call for.
Should I add waste?
The count starts at the exact number — 18 rolls for that attic. Tap +10% and it buys 20. Rolls get trimmed around pipes, wires, and joist ends, so a small cushion saves a second trip.
How many rolls for a 400 sq ft wall?
10 rolls. 400 ÷ 40 = 10 exactly. Measure the wall as length × height and enter those two numbers.
What's the biggest mistake people make with roll insulation?
Compressing it to fit. A squeezed batt loses R-value, so cut rolls to fit the cavity instead of stuffing them. And air-seal the gaps first — insulation slows heat, it doesn't stop air.