8-Inch Pipe Slope Over 50 Feet
A 8-inch sewer or drain line runs at a 0.4% minimum slope. Over a 50-foot run that is 0.2 feet of fall — 2.4 inches (2 3/8″). If your upstream invert is 100.00 ft, the downstream invert lands at 99.8 ft.
Fall table — 8-inch pipe over 50 feet
| Distance from start | Fall so far | Fall (inches) | Invert (if start = 100.00) |
|---|---|---|---|
| 25 ft | 0.1 ft | 1 3/16 in | 99.9 ft |
| 50 ft (end) | 0.2 ft | 2 3/8 in | 99.8 ft |
How it is figured
Slope × distance: 0.4% means the pipe drops 0.05 inches for every foot it runs (0.48″ every 10 ft, or 0.04 ft in rod tenths). Over 50 ft: 50 × 0.05″ = 2.4″ = 0.2 ft of fall.
0.4% is the standard minimum for 8-inch pipe — flat enough to keep solids moving without outrunning the water. Run it flatter and the line silts up; much steeper and water can outrun solids on long drops. Always confirm local code — some jurisdictions want more slope on 8-inch lines.
Figure a different run or a custom slope with the free storm drain calculator or the sewer line calculator.
Keep figuring
8″ over 100 ft · 8″ over 75 ft · 8″ over 25 ft · Storm drain calculator · Sewer line calculator · All charts & tables
Common questions
How much fall does a 8-inch pipe need over 50 feet?
At the standard 0.4% minimum slope, a 8-inch pipe falls 0.2 ft (2.4 in.) over 50 ft — 0.48 in. of fall every 10 ft.
What is the minimum slope for 8-inch pipe?
0.4% — that is 0.05 inches of fall per foot of run. It is the widely used minimum for 8-inch sewer and drain pipe; local code can require more.
How do I check the slope with a grade rod?
Grades are read in tenths of a foot. This run drops 0.04 ft every 10 ft, so each 10-foot station should read 0.04 ft lower than the last. String from invert to invert and check the rod at each station against the table above.