Roofing Calculator
What kind of roof?
Cut-up roofs need a bigger waste buffer for all those angles.
Pick a roof type to continue.
How big is the footprint?
Measure the house footprint from the ground, eave to eave — we do the slope math.
Pitch = inches of rise per 12" of run
Pick a pitch.
Ridge length
How many feet of ridge cap along the peak? Enter 0 if none.
Ridge bundles cover about 35 lin ft each.
Waste allowance — add whatever cushion fits your roof
Your shingle count
BUNDLES TO BUY
–
- Roof area
- –
- Squares
- –
- Ridge bundles
- –
- Felt rolls
- –
💡 Pro field tips
🧰 Tools you'll need
Tap to check off as you load up.
Est. project cost (optional)
File this estimate under a job name or PO to track what to order. Leave blank to file under "General".
Copied to clipboard ✓
How the math works
Roofers don't talk in square feet — they talk in "squares." One square is 100 square feet of roof surface, and shingles are packaged so that three bundles make one square (for standard 3-tab shingles). The whole estimate is: measure the roof's actual sloped surface, convert to squares, and add enough extra for the cuts, valleys, and ridge caps. Skip the slope adjustment and you'll run 10–40% short — the most common roofing estimate mistake.
From footprint to roof surface
You can't use the house's floor area, because a sloped roof has more surface than the flat footprint it covers. Roof area = footprint × pitch factor. The factor comes straight from the Pythagorean theorem: a 6/12 pitch (rises 6 inches for every 12 inches of run) has a slope length of √(6² + 12²) = 13.4 inches per 12 inches of run, giving a factor of 1.118. Common factors roofers memorize: 4/12 → 1.054, 6/12 → 1.118, 8/12 → 1.202, 10/12 → 1.302, 12/12 → 1.414. Steeper pitch, bigger multiplier, more shingles.
Squares and bundles
Squares = roof area ÷ 100. Bundles = squares × 3. A 2,000-square-foot roof surface is 20 squares, needing 60 bundles. Note that thicker architectural shingles are sometimes packed 4 bundles to the square — check the wrapper, because assuming 3 when it's 4 leaves you 25 percent short.
Valleys, hips, and ridges
Valleys (where two slopes meet) need shingles woven or cut in — that cutting waste is exactly what the waste cushion is for — and it's why cut-up roofs usually get a bigger one: 15% is the common pick, against 10% for a simple gable. Hips and ridges get cap shingles: measure their linear feet and divide by cap coverage, about 35 linear feet per bundle of caps — and the calculator counts ridge bundles separately from the field bundles, so they never eat your shingle count. Don't forget starter strip along the eaves: one bundle of starter covers roughly 100–120 linear feet.
The waste factor
The calculator starts at 0 percent — no waste added, whatever your roof type. Add your cushion with the waste chips on the results screen (0/5/10/15/20%): 10 percent is the common pick for a simple gable roof, 15 percent for hips, valleys, and dormers. Every angled cut throws away a triangle of shingle, and complex roofs are mostly angled cuts. Roofing waste isn't a fudge factor — on a cut-up roof you can watch the scrap pile grow and see exactly where it went.
Worked example
30 × 40 ranch, 6/12 pitch, simple gable: footprint 1,200 sq ft × 1.118 = 1,342 sq ft of roof surface → 13.42 squares — no rounding yet — × 3 bundles × 1.10 (with 10% waste added — the common pick for a simple roof) = 44.29 → round up once at the end: 45 bundles. The ridge is separate: 40 linear feet ÷ 35 ≈ 2 bundles of caps, counted on top of the 45.
Most Asked Questions
How many shingle bundles do I need?
Three bundles make one square — 100 sq ft of roof surface. Divide your sloped roof area by 100 for squares, multiply by 3, and add the waste for your roof type on top with the waste chips — it starts at 0%. A 2,000 sq ft roof surface is 20 squares — 60 bundles before waste.
How do I measure a roof for shingles?
Measure the footprint from the ground, then multiply by the pitch factor. A sloped roof has more surface than the flat footprint under it: 6/12 pitch multiplies by 1.118, 12/12 by 1.414. Skip the factor and you'll come up 10–40% short — the most common roofing estimate mistake.
How much waste should I add for roofing?
None to start — the waste starts at 0%. Add what you want with the waste chips: 10% is common for a simple gable, 15% for cut-up roofs.
What if my shingles come 4 bundles to a square?
Check the wrapper — this calculator figures 3 bundles per square. Thicker architectural shingles are sometimes packed 4 to the square. Assume 3 when it's really 4 and you come up 25% short — a whole second delivery in the middle of a tear-off.
How many ridge cap bundles do I need?
One bundle of caps covers about 35 linear feet of ridge. Enter your total ridge length and the calculator divides by 35 and rounds up — caps are separate from the field bundles, so don't let them eat your shingle count.
How much underlayment do I need?
One roll of felt underlayment for every 400 sq ft of roof surface. The calculator figures rolls from the same sloped area as the shingles. In snow country, add ice-and-water shield at the eaves — run it 2 ft past the warm wall line against ice dams.