Kipi Calculator SIDING & TRIM ESTIMATOR by Kipi Calculator
🌐 Español

Siding Calculator

    What are you hanging?

    Pick your siding — the trim math stays the same.

    Tell me about the house

    Wall measurements — we subtract the doors and windows for you.

    Doors
    Windows

    We subtract ~21 ft² per door and ~15 ft² per window so you don't overbuy.

    Your siding count

    Waste allowance Starts at 0% — tap to add a cushion for cuts & damaged pieces.

    SQUARES TO ORDER

    –

    Net wall ft²
    –
    Exact squares
    –
    With waste
    –
    Trim LF
    –

      💡 Pro field tips

        🧰 Tools you'll need

        Tap to check off as you load up.

        Est. project cost (optional)

        File this estimate under a job name or PO to track what to order. Leave blank to file under "General".

        How the math works

        Siding is sold in "squares" — one square is simply 100 square feet of wall. The job is converting your house into squares, then accounting for everything that isn't siding: windows, doors, trim, and starter pieces. Here's the breakdown.

        Gross wall area

        Wall area = Σ (Wall length × Wall height)

        A 40 × 30 house with 9-ft walls: 2×(40×9) + 2×(30×9) = 1,260 sq ft. One limit to know: this calculator works from the four walls only — it has no gable input. If your house has gable ends, figure each triangle ((base × height) ÷ 2) and add its squares by hand; skip them and you'll come up short.

        Subtract openings

        Net area = Gross − Windows − Doors

        Ten 3×5 windows (150 sq ft) + two 3×7 doors (42 sq ft) = 192. Net: 1,260 − 192 = 1,068 sq ft. Pros subtract full opening sizes even though trim covers the edges — trim is estimated separately, and slightly under on siding beats over.

        Convert to squares

        Squares = Net area ÷ 100 — kept exact, not rounded up

        1,068 ÷ 100 = 10.68 squares. The calculator keeps the exact figure, applies your waste percentage to it, and only then rounds the order up to the nearest tenth of a square.

        Courses: the horizontal rows (background)

        Background only — the calculator figures siding from net wall area and never asks for an exposure or counts courses. Each visible row is a "course"; the exposed part is the "exposure" (4–8 inches):

        Courses = Wall height (in) ÷ Exposure (in), rounded UP

        108 ÷ 6 = 18 courses. The top course rarely lands flush — you'll rip-cut the last row to fit under the soffit, and that ripped piece is pure waste.

        Trim in linear feet

        • Starter strip — figure it separately by hand (total wall length); the calculator’s trim count does not include it
        • J-channel = perimeter of all openings (frames windows and doors)
        • Corner posts = one per outside corner, wall height each

        Waste factor

        Every window and door creates cut pieces on both sides — a house with 15 openings wastes far more than a blank barn wall. Add 10% for simple houses, 15% for gables and bump-outs:

        Buy = Squares × (1 + waste %), rounded UP to the nearest tenth — the calculator starts at 0%; add 10% or 15% with the waste chips

        Worked example

        • Squares: 1,068 ÷ 100 = 10.68; with 10% waste: 10.68 × 1.10 = 11.75 → order 11.8 squares
        • Trim: 252 ft (4 × 9 ft corners + 18 ft around each of the 12 openings)

        Most Asked Questions

        How many squares of siding do I need for a 40 × 28 ft house?

        Order 10.7 squares with no waste added. The walls total 1,224 ft²; subtract 2 doors and 8 windows (162 ft²) and the net is 1,062 ft² — 10.62 exact squares, rounded up to the nearest tenth.

        How does the calculator treat windows and doors?

        It subtracts 21 ft² per door and 15 ft² per window. Those are standard opening sizes, so you don't have to measure every one — just count the openings and enter the counts.

        Does it figure gable ends?

        No — it works from the four walls only. Figure each gable triangle by hand — (base × height) ÷ 2 — and add those squares yourself, or you'll come up short on the ends.

        How much trim does it figure?

        216 ft on that house. Four corners at wall height (4 × 9 ft) plus 18 ft around each of the 10 openings.

        Vinyl or fiber cement — does the type change the count?

        No — the squares come out the same. Both are figured from net wall area; the type you pick labels the result and goes with the price per square you enter. Pick the material you're actually buying.

        How much waste should I add?

        Nothing is added until you tap a chip. At +10% that house orders 11.7 squares. More openings mean more cuts — houses with lots of windows and doors are the ones that earn the cushion.

        Next calculation

        One job usually leads to the next number. Common next steps from here:

        Embed this calculator on your site

        Run a DIY, contractor, or supplier site? Put this siding calculator right on your page, free. Copy the code and paste it where you want it — your visitors get the numbers without leaving your site.

        Free to use. The small “Powered by Kipi Calculator” line at the bottom of the calculator stays on — that’s all we ask.