Kipi Calculator TILE & GROUT ESTIMATOR by Kipi Calculator
🌐 Español

Tile Calculator

    What size tile?

    Tiles + 10% for cuts

    Diagram: what the measurements mean

    Pick the tile you're laying — the math adjusts.

    Tell me about the floor

    Measure the area you're tiling, wall to wall.

    How are you laying it?

    Diagonal looks sharp but eats more tile in cuts.

    Your tile count

    Waste allowance Starts at 0% — tap to add a cushion for cuts & breakage.

    Buy this many tiles

    –

    Exact tiles
    –
    With waste
    –
    Thinset (50-lb)
    –
    Grout (25-lb)
    –

      💡 Pro field tips

        🧰 Tools you'll need

        Tap to check off as you load up.

        Est. project cost (optional)

        File this estimate under a job name or PO to track what to order. Leave blank to file under "General".

        How the math works

        Tile estimating starts simple — floor area divided by tile size — then gets honest about the cuts. Every tile job ends with a pile of L-shaped offcuts and slivers, because rooms are never an exact number of tiles wide. The waste percentage is the most important number on this page: it's the difference between finishing the last row and making a panicked second trip to the store, hoping they still have your dye lot. (dye lots vary — buy it all at once.)

        Floor area and tile count

        Tiles = floor area ÷ one tile's area. A 10 × 12 room is 120 square feet. A 12 × 12 tile covers exactly 1 square foot, so that's 120 tiles before waste. For odd sizes, convert to square feet first: a 6 × 24 plank is 0.5 × 2 = 1 square foot. Do all math in square feet. Don't subtract for toilets or vanities — the cuts waste more than the fixture covers.

        Why layout changes the waste

        A straight grid wastes about 10 percent: edge cuts plus the occasional cracked tile. A diagonal (45-degree) layout wastes 15 percent or more, because every perimeter tile gets cut on an angle and both offcuts are usually unusable. Large-format tiles waste more than small ones — one bad cut on a 24 × 48 tile throws away four square feet. Borders, niches, and herringbone start at 15% and go up.

        Grout and thinset

        Grout fills the joints and thinset bonds the tile to the floor. This calculator uses one standard rate for each: a 25-pound bag of grout covers about 90 square feet, and a 50-pound bag of thinset covers about 100 square feet. It divides your floor area by the rate and rounds up to whole bags — no waste percentage is added to grout or thinset, only to the tile count. Uneven subfloors drink thinset; large tiles need back-buttering too, so a rough floor can run past the estimate.

        The waste factor

        10 percent for a straight lay, 15 percent for diagonal or large format — and always round up to full boxes, since tile is sold by the box, not the tile. Keep a spare box for future repairs — matching dye lots later is a gamble.

        Worked example

        10 × 12 bathroom, 12 × 12 tiles, straight lay: 120 sq ft = 120 tiles × 1.10 = 132 tiles. Boxes of 12: 132 ÷ 12 = 11 boxes. Grout: 120 ÷ 90 = 1.33 → 2 bags. Thinset: 120 ÷ 100 = 1.2 → 2 bags.

        Most Asked Questions

        How many tiles do I need for a 10×12 floor?

        120 tiles exact with 12×12 tile — 132 with the 10% waste chip. The floor is 120 sq ft and each 12×12 tile covers exactly 1 sq ft. This calculator starts at 0%, so tap a chip for cuts and breakage.

        How much grout and thinset do I need?

        For a 120 sq ft floor: 2 bags of each. The calculator figures one 50-lb bag of thinset per 100 sq ft and one 25-lb bag of grout per 90 sq ft, rounded up — and no waste percentage is added to the bags, only to the tile count.

        Does a diagonal layout change how many tiles I need?

        Not in this calculator — the pattern choice doesn't change the count. Diagonal work wastes more on a real floor (about 15%), so tap the 15% chip when you lay diagonal. The waste comes from the chips, not the pattern button.

        How many 6×6 tiles do I need for a small bathroom?

        160 tiles exact for a 5×8 floor — 176 with the 10% chip. Each 6×6 tile covers a quarter of a square foot, so 40 sq ft ÷ 0.25 = 160. The same floor takes 1 bag of thinset and 1 bag of grout.

        Should I subtract the area under the toilet and vanity?

        No — figure the full floor. The cuts around fixtures waste more tile than the covered area would save, so measure the whole length × width and let the waste chip handle the rest.

        How are 12×24 tiles counted?

        Each one covers 2 sq ft — a 120 sq ft floor needs 60 tiles exact. Bigger tiles mean fewer pieces, but one bad cut throws away two square feet, which is exactly what the waste chip is for.

        Next calculation

        One job usually leads to the next number. Common next steps from here:

        Embed this calculator on your site

        Run a DIY, contractor, or supplier site? Put this tile calculator right on your page, free. Copy the code and paste it where you want it — your visitors get the numbers without leaving your site.

        Free to use. The small “Powered by Kipi Calculator” line at the bottom of the calculator stays on — that’s all we ask.

        Popular lookups

        10×10 floor · 8×10 floor · 12×12 floor · 10×12 floor · All charts